Monitor Control Function
OPEN/CLOSE
OPEN/CLOSE 5 ∞
SCRN
4 English
MODE
V.SEL
FNC
Opening the Monitor
1 Set the vehicle's parking brake.
2 Press the [OPEN/CLOSE] button.
The monitor will open.
• The gear shift lever or other parts may interfere with the
monitor when it opens. If so, move the gear shift lever
(being sure to do so safely) before operating the set. (The
monitor is drawn back in automatically if it cannot be
opened normally due to an obstacle.)
• If you open the monitor when the power is off, it switches
on and opened.
• The position to which the monitor slides or angle when the
power is turned on can be set. (Refer to the angle control
screen on (Page 6).
Closing the Monitor
Press the [OPEN/CLOSE] button.
The monitor will close.
Power Off
Press the [V.SEL] button for at least 1 second.
Power On
Press the [V.SEL] button.
Switching the Monitor's Picture
Press the [V.SEL] button.
Each time the button is pressed the monitor's picture
switches as follows:
During the KTC-V500N or KTC-V500P is not
connected:
Display
Picture
"VIDEO 1"
Video 1 (AV IN1 setting during "VIDEO 1")
"VIDEO 2"/
Video 2 (AV IN2 setting during "VIDEO 2"
"R-CAM"
or "R-CAM")
"NAV"
Navigation (NAV setting during "RGB" or
"AV IN1")
During the KTC-V500N or KTC-V500P is connected:
Display
Picture
"VIDEO 1"
Video 1 (AV-IN1 setting during "VIDEO 1")
"VIDEO 2"/
Video 2 (AV IN2 setting during "VIDEO 2"
"R-CAM"
or "R-CAM")
Channel
Television
"NAV"
Navigation (NAV setting during "RGB" or
"AV IN1")
For "AV IN" and "NAV" setting, refer to <System Setup
Screen> (Page 9).
You cannot view television and video pictures whilst the
vehicle is moving. To enjoy television and video pictures,
find a safe place to park and engage the parking brake.
Volume <SP VOL>
Increasing Volume:
Press the [5] button.
Decreasing Volume:
Press the [∞] button.