System Setup Screen-2; Setting The Av Output Mode [Av-Out]; Fm Transmitter Function [Fm-Tx]; Switching The Setup Screen -1 - Kenwood VZ-5000 Instruction Manual

System Setup Function

System Setup Screen-2

Setting the AV Output Mode [AV-OUT]

Touch Setting
[¶NORMAL] Picture/sound with monitor
[¶VIDEO 1]/ Picture/sound from AV IN1 terminal.
[¶NAV]
[¶VIDEO 2]/ Picture/sound from AV IN2 terminal.
[¶R-CAM]
[¶TV] Picture/sound from television.
(During the KTC-V500N or KTC-V500P is
connected)

FM Transmitter Function [FM-TX]

You can use the FM transmitter function to hear the
sound of the source set in AV OUT from your car FM
radio.
Touch Setting
[¶ON] The FM transmitter is turned on.
[¶OFF] The FM transmitter is turned off.
Selecting the frequency:
Press the [2] or [3] button to change the frequency by
0.1 MHz step.
Selecting the VIDEO 1/NAV level:
Press the [2] or [3] button.
Selecting the VIDEO 2/R-CAM level:
Press the [2] or [3] button.
• Be sure to select a frequency that is not the same as a
broadcast station in your area.
• The auto seek function on your car radio may not stop at the
FM transmitter frequency. In this case, use the manual seek
function to set the radio to the FM transmitter frequency.

Switching the Setup Screen -1

Touch the [ 2 ] button.

Exit the System Setup-2 Screen

Touch the [RETURN] button.
Return to the setup menu screen.
10 English

Setting the TV Area

(During the KTC-V500P is connected)
Select the area for TV broadcast viewing.
picture.
Selecting the Preset Bands:
Touch the [TV 1] or [TV 2] button.
Selecting the Reception Area:
Touch the [¶G1] - [¶G5] button.
[¶G1]
[¶G2]
[¶G3]
[¶G4]
[¶G5]
Select the channel setting for your country as follows.
The reception area can be set for two separate preset bands
TV1 and TV2.

Exit the TV Area Setting Screen

Touch the [RETURN] button.
Return to the tuner setting menu screen.

TV Area Setting Screen

China
Singapore
Malaysia
Thailand
Burnei
Hong Kong
Indonesia
Australia
PAL-D
PAL-B/G
PAL-I
PAL-B/G