Touch Panel Adjustment Screen; Adjusting The Touch Position - Kenwood VZ-5000 Instruction Manual

Touch Panel Adjustment Screen

Adjusting the Touch Position

The touch panel can be adjusted if the position
touched and the operation performed do not match.
1
Accurately touch the mark at the lower left.
2
Accurately touch the mark at the upper right.
When the mark at the lower left is touched, the
adjustment is completed and the system setup menu
screen reappears.
• If the [CANCEL] button is touched without touching the
button at the lower left, the adjustment is canceled and the
screen that was set before switching to the system setup
menu reappears.
• If the [CANCEL] button is touched after touching the button
at the lower left, the button at the lower left reappears.
• If the [RESET] button is touched, the settings are reset to the
factory defaults and the setup menu screen reappears.
English 11