Kenwood KVT-M707 Instruction Manual

7-inch wide screen monitor-receiver.
Hide thumbs

Advertisement

7-Inch WIDE SCREEN MONITOR-RECEIVER
KVT-M707
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new Monitor-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KVT-M707 Serial number
US Residence Only
Register your Kenwood product at
www.kenwoodusa.com
© B64-3131-00/00 (KV)
Register Online

Advertisement

   Related Manuals for Kenwood KVT-M707

   Summary of Contents for Kenwood KVT-M707

  • Page 1

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KVT-M707 Serial number...

  • Page 2: Table Of Contents

    Before Use ... 4 Opening/Closing the Monitor and Power Switch ... 6 Removing/Attaching the Protection Panel 7 KVT-M707 Basic operations ... 8 Basic Operations of Remote Controller ... 10 Switch Screen Mode ... 12 Muting Audio Volume upon Reception of Phone call ...

  • Page 3

    Setup Menu Setup Menu ...46 Displaying the Control screen Displaying the Setup Menu screen Audio Set Up ...47 Displaying the Audio Set Up screen Crossover Network Setup System Setup ...50 Displaying the System Set Up 1 screen Displaying the System Set Up 2 screen AV Interface ...52 Displaying the AV I/F 1 screen Displaying the AV I/F 2 screen...

  • Page 4: Before Use

    • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. Audio units you can control from the KVT-M707 Receiver (As of April, 2005): KTC-V500N, KTC-SR901, KTC-SR902, KTC-SR903, KTC-HR100, KHD-CX910, KHD-C710, KTC-WB100, KDC-C719, KDC-C669, KDC-C469, KDV-C810,...

  • Page 5

    Loading and Replacing the battery 1. Use two "R03"/ "AAA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. 2. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. 2WARNING •...

  • Page 6: Opening/closing The Monitor And Power Switch

    Opening/Closing the Monitor and Power Switch Open the monitor Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, •...

  • Page 7: Removing/attaching The Protection Panel

    Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Close the monitor first, then remove or attach the protection panel.

  • Page 8: Kvt-m707 Basic Operations

    KVT-M707 Basic operations ■ When the monitor is open ■ When the monitor is closed English...

  • Page 9

    1 Play/Pause [38] key Pauses and replays a disc. 2 Video Source Selection [V.SEL] key Video source selection changes in the following order each time you press the key. Video/ TV* Rear view camera* Navigation* *Optional accessory You can also turn off the video display by pressing the key longer than 1 second.

  • Page 10: Basic Operations Of Remote Controller

    Basic Operations of Remote Controller ENTER MENU – ZOOM ZOOM POSITION MODE ROUTEM VIEW MAPDIR VOICE 2-ZONE AV OUT REAR 1 Remote Control Mode selector switch Selects one of the following remote control modes when switched to AV control mode with [NAV] switch. TV source AUD: Tuner source or attached disc changer/disc...

  • Page 11

    5 [V.SEL] key Video source selection changes in the following order each time you press the key. Video/ TV* Rear view camera* Navigation* *Optional accessory 6 [BAND] key TUNER +: Switches to the FM1, FM2, or FM3 band. –: Switches to the AM band. BAND: Switches to TV1, TV2, or VIDEO.

  • Page 12: Switching Screen Mode

    Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. Full picture mode (FULL) Justify picture mode (JUST) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed.

  • Page 13: Muting Audio Volume Upon Reception Of Phone Call

    Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and the system automatically attenuates the audio volume. Phone Call ("CALL") screen C A L L If you want to continue to listen to the audio...

  • Page 14: Tuner Control, Displaying The Easy Control Panel, Displaying The Tuner Control Screen, Seek Mode

    4 Tunes in a station. 5 Switches the Seek mode. (see page 16 for the <Seek Mode>) • For receiver key operations, see <KVT-M707 Basic Operations> (see page 8). • The Easy Control Panel is hidden when you touch a central part of monitor.

  • Page 15: Displaying The Tuner Menu Screen, Seek Mode, Auto Memory, Manual Memory, Preset Select, Radio Text

    Displaying the Tuner Menu screen You can select menu options using various functions. Me n u Tuner Menu screen T U N E R Preset Select Name Set PTY Search Radio Text a When the stations on memory. For memory of broadcasting stations, see <Auto Memory>...

  • Page 16: Seek Mode, Auto Memory, Manual Memory

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO1 reception automatically.

  • Page 17: Preset Select, Set Station Name

    Preset Select Lists and tunes in stations in memory one after the other. Call the Tuner Menu Me n u Call the Preset Select Menu Preset Select T U N E R FM1 1) 87.5 MHz FM1 2) 90.1 MHz DISP FM1 3) 98.1 MHz FM1 4) 106.1 MHz...

  • Page 18: Direct Search, Traffic Information

    Direct Search Tunes in a station when its frequency is entered. Select a band – BAND Select the Direct Search mode # BS DIRECT Enter frequency — 9 WXYZ When you enter frequency, signal reception starts. Example: When you receive FM 92.1 MHz 9 WXYZ 2 ABC 1 .

  • Page 19: Search For Program Type, Radio Text

    Search for Program Type A program is tuned when you set its program type. Call the Tuner Menu Me n u Call the PTY Search Menu PTY Search T U N E R All Speech All Music News Current Affairs SRCH Information F M 9 8 .

  • Page 20: Disc Changer/cd Player Control, Displaying The Easy Control Panel

    5 Selects a disc when a disc is played back on the disc changer. • For Disc Changer/CD player playback and receiver key operations, see <KVT-M707 Basic Operations> (see page 8). • The Easy Control Panel is hidden when you touch a central part of the monitor.

  • Page 21: Screen, Displaying The Disc Changer/ Cd Player Menu, Set Disc Name

    Displaying the Disc Changer/ CD player Menu screen You can select menu options using various functions. Me n u CD Menu screen Name Set y Selects the Disc Name (see page 22 for the <Set Disc Name>), Disc Text, or Track Text mode for text display.

  • Page 22: Set Disc Name, Disc Select (during Play By Disc Changer

    Set Disc Name Names a CD. Play a CD you wish to name Call the CD/Disc Changer Menu Me n u Select the Set Name mode Name Set • The Name Set depending on the disc you are playing. Enter a name For character entry details, see <Character Entry>...

  • Page 23

    Direct Search Searches for a disc or a track when its number is entered. Enter a disc or track number 9 WXYZ — Search When searching for a track: ¢ When searching for a disc: – BAND • The operation ends automatically if you do not operate within 10 seconds.

  • Page 24: Tv/ Video Control, Displaying The Tv Picture Screen, Displaying The Easy Control Panel, Seek Mode

    Switches to TV1, TV2, VIDEO1, or VIDEO2. 7 Information Display Button Area • For TV picture selection and receiver key operations, see <KVT-M707 Basic Operations> (see page 8). 2 c h • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated (see page 54).

  • Page 25: Displaying The Tv Control Screen, Displaying The Tv Menu Screen, Seek Mode, Auto Memory

    Displaying the TV Control screen You can tune in a TV station using various functions. TV Control screen VIDEO – – SEEK N e x t N e x t T V 1 P r e s e t 1 AUTO1 Displaying the TV Menu screen You can select menu options using various...

  • Page 26: Auto Memory, Seek Mode, Manual Memory, Preset Select

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched each time you touch the button. Tunes in a station with good AUTO1 reception automatically. Tunes in stations in memory one AUTO2 after another.

  • Page 27: Set Station Name, Direct Search

    Set Station Name Names a station. Select a station you wish to name Call the TV Menu (Page 25 t) Me n u Select the Set Name mode Name Set Enter a name For character entry details, see <Character Entry> (see page 43).

  • Page 28: Sirius Tuner Control, Displaying The Easy Control Panel, Displaying The Sirius Tuner Control Screen

    SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the • For system key operations, see <KVT-M707 Basic Operations> (see page 8). • The Easy Control Panel display is hidden when you touch a central area of the monitor.

  • Page 29: Displaying The Sirius Tuner Menu, Channel Search, Channel Memory

    Displaying the SIRIUS Tuner Menu You can select menu options using various functions. Me n u SIRIUS Tuner Menu screen S I R I U S Channel Search 10key Direct SIRIUS Information i When recall the channel on memory. For memory of channel stations, see <Channel Memory>...

  • Page 30: Channel Search, Channel Memory

    Channel Search The categories and channels are listed for your channel selection. Call the SIRIUS Tuner Menu Me n u Start Channel Searching Channel Search The category list appears. Category Selection screen S I R I U S CAT.Pop CAT.Rock CAT.Countr y CAT.Jazz&Standard CAT.Clasical...

  • Page 31: Direct Channel Search, Channel Search, Information Display

    Direct Channel Search A channel is tuned when you enter its number. Call the SIRIUS Tuner Menu Me n u Display the Direct Search screen 10key Direct Direct Search screen S I R I U S 9 9 9 c h J a z z E n C l a v e C a n c e l 1 Enters a channel number.

  • Page 32: Hd Radio Control, Displaying The Easy Control Panel, Displaying The Hd Radio Control Screen

    4 Tunes in a station. 5 Switches the Seek mode. (see page 34 for the <Seek Mode>) • For receiver key operations, see <KVT-M707 Basic Operations> (see page 8). • The Easy Control Panel display is hidden when you touch the central area of the monitor.

  • Page 33: Displaying The Hd Radio Menu Screen, Seek Mode, Auto Memory, Manual Memory, Receive Mode

    Displaying the HD Radio Menu screen You can select menu options using various functions. Me n u HD Radio Menu screen HD RADIO Receive Mode Title o When recall the stations from memory. For memory of broadcasting stations, see <Auto Memory>...

  • Page 34: Manual Memory, Seek Mode, Auto Memory

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched each time you touch the button. Tunes in a station with good AUTO1 reception automatically. Tunes in stations in memory one AUTO2 after another.

  • Page 35: Receive Mode, Title Display

    Receive Mode The digital or analog program is selected and received. Call the HD Radio Menu Me n u Call the Receive mode Menu Receive Mode H D R A D I O Receie Mode A U T O 1 Switches the Receive mode. 2 Receive mode Display.

  • Page 36: Dab Tuner Control, Displaying The Easy Control Panel, Displaying The Dab Tuner Control Screen

    5 Selects the Ensemble. 6 Switches the Seek mode. (see page 38 for the <Seek Mode>) • For system key operations, see <KVT-M707 Basic Operations> (see page 8). • The Easy Control Panel display is hidden when you touch the central area of the monitor.

  • Page 37: Displaying The Dab Tuner Menu Screen, Dab Information

    Displaying the DAB Tuner Menu screen You can select menu options using various functions. Me n u DAB Tuner Menu screen D A B Ser vice Select Languag e Filter PTY Search DAB Information s Selects options from various function menus. d Returns to the DAB Tuner Control screen.

  • Page 38: Auto Ensemble Memory, Seek Mode, Service Preset Memory

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched each time you touch the button. Tunes in a station with good AUTO1 reception automatically. Tunes in stations in memory one AUTO2 after another.

  • Page 39: Service Select, Language Filter

    Service Select The service list of the currently receiving ensemble is displayed for your selection. Call the DAB Tuner Menu Me n u Call the Service Select Menu Ser vice Select D A B Ser vice Name Ser vice Name Ser vice Name Ser vice Name Ser vice Name...

  • Page 40

    Search for Program Type The services are received when you set its program type. Call the DAB Tuner Menu Me n u Call the PTY Search Menu PTY Search D A B N e w s SRCH LANG 2 2 0 . 0 9 4 1 Selects a program type.

  • Page 41: Dab Information, Dab Announcement

    DAB Information The DAB information is displayed. Call the DAB Tuner Menu Me n u Display the DAB Information screen DAB Information D A B Service Label: Ensemble Label: Component Lable: 2 2 0 . 0 9 4 1 Displays the DAB information (such as Service label, Ensemble label, Component label, Audio quality, Region label, and Dynamic label).

  • Page 42: Weather Band Tuner Control, Displaying The Easy Control Panel

    1 Adjusts the volume. 2 Switches the source. 3 Tunes in a station. • For system key operations, see <KVT-M707 Basic Operations> (see page 8). • The Easy Control Panel display is hidden when you touch the central area of the monitor.

  • Page 43: Character Entry, How To Use The Character Entry Screen

    Character Entry How To Use the Character Entry screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen K E N W O O D S p a c e 1 Adjusts the volume.

  • Page 44: Source Select, Displaying The Control Screen, Displaying The Source Select Screen

    Source Select The source you wish to listen to can be selected quickly. Displaying the Control screen Press this key several times unit the Control screen appears. Control screen T U N E R CRSC SEEK DISP N e x t N e x t F M 1 P r e s e t 1...

  • Page 45: Adjusting The Monitor Display Position And Quality

    Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen You can adjust the picture quality using the following keys. Screen Control screen Displaying the Angle Control screen You can set the monitor position and open/close speed.

  • Page 46: Setup Menu

    Setup Menu Setup Menu You can set up various receiver parameters. Displaying the Control screen Press this key several times until the Control screen appears. Control screen T U N E R CRSC SEEK DISP N e x t N e x t F M 1 P r e s e t 1 AUTO1...

  • Page 47

    Audio Set Up You can setup a speaker network, etc. Displaying the Audio Set Up screen Speaker setup screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu.

  • Page 48: Crossover Network Setup

    Crossover Network Setup You can set a crossover frequency of speakers. (Page 47 5) X'Over setup screen X ' O v e r HPF Front FREQ 2 2 0 H z HPF Rear FREQ 1 8 0 H z LPF SUB FREQ 1 2 0 H z S U B P h a s e 1 Sets a Front High Pass Filter frequency.

  • Page 49

    Before Use Setup Menu English...

  • Page 50: System Setup

    System Setup You can set up the system parameters. Displaying the System Set Up 1 screen System Set Up 1 screen B e e p S c ro l l A u t o Remote Sensor System Set Up 1 English 1 Adjusts the volume.

  • Page 51

    Displaying the System Set Up 2 screen System Set Up 2 screen Key ILLUMI G r e e n System Set Up 2 9 Selects an illumination color of receiver keys. Red) "Green": Green "Red": p Displays the System Set Up 1 screen. Setup Menu English...

  • Page 52: Control During Dvd Video Or Video Cd Playback

    2 Calls the Sound Effects Menu. (see page 62) 3 Calls the Setup Menu. 4 Selects a navigation system connection. ( "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. "AV-IN1": Allows a third-party navigation system to connect via the AV INPUT1 port.

  • Page 53

    Before Use Displaying the AV I/F 2 screen AV I/F 2 screen A V - I N 1 Displaying the AV I/F 3 screen AV I/F 3 screen F - L e f t Navigation Sou r c e 9 Sets a method to switch to the rear view camera video display.

  • Page 54: User Interface

    Control during DVD Video or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen User I/F 1 screen Wa l l Displaying the User I/F 2 screen User I/F 2 screen English 1 Adjusts the volume.

  • Page 55: Touch Panel Adjustment

    Before Use Touch Panel Adjustment You can adjust the touch panel operations. Display the Touch Panel Adjust screen Touch Touch touch to display it. Touch Adjust Me n u T o u c h 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 56: Security Code Setup

    Before Use Security Code Setup You can set a security code to protect your receiver system against theft. • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice.

  • Page 57

    Before Use If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code — You must enter the same security code as that you have entered in Step 3 above. Enter the security code E n t e r Now, you can use your Receiver.

  • Page 58

    Before Use Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. Display the Set Up Memory screen Set Up Memor y Set Up Memor y...

  • Page 59

    Before Use SIRIUS Setup <North American sales only> You can display the SIRIUS ID. (with the optional accessory SIRIUS Tuner connected only) Displaying the SIRIUS Set Up screen SIRIUS Set Up SIRIUS Set Up screen Me n u S I R I U S I D 1 2 3 4 5 6 7 8 9 0 1 2 S I R I U S S e t U p 1 Adjusts the volume.

  • Page 60

    Control during DVD Video or Video CD Playback DAB Set Up You can set the DAB reception.(only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen DAB Set Up DAB Set Up screen D A B P r i o r i t y Me n u D R C R e g i o n a l I N T...

  • Page 61

    Announcement Selection You can set various announcement reception parameters. Displays the Announcement Selection screen (page 60 9) S e t A n n o u n c e m e n t Tr a f f i c N e w s Tr a n s p o r t N e w s Wa r n i n g N e w s...

  • Page 62

    Sound Effects Menu Before Use Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen Control screen T U N E R CRSC SEEK DISP N e x t N e x t F M 1 P r e s e t 1 AUTO1 Displaying the Sound Effects Menu...

  • Page 63: Audio Control

    Before Use Audio Control You can adjust the front/ rear and right/ left audio balance. Displaying the Audio Control 1 screen Audio Control 1 screen Displaying the Audio Control 2 screen Audio Control 2 screen Me n u BMS AMP Bass F l a t BMS AMP FREQ Normal...

  • Page 64

    Control during DVD Video or Video CD Playback Equalizer You can set up the equalizer. Displaying the Equalizer screen Equalizer screen Me n u System Q N a t u r a l S y s t e m Q - E X Equalizer English 1 Adjusts the volume.

  • Page 65

    Before Use Tone curve setup You can set a Tone curve. Display the Tone setup screen T o n e Tone setup screen Ba s s DC E X T 1 Adjusts the volume. 2 Bass adjustment items are displayed. 3 Middle adjustment items are displayed.

  • Page 66: Zone Control

    Zone Control You can set the front and rear audio source. Displaying the Zone Control screen Zone Control screen N o r m a l English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu.

  • Page 67

    English...

  • Page 68: Troubleshooting Guide

    Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misopera- tion or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn on. ✔...

  • Page 69

    No sound can be heard, or the volume is low. ✔ Attenuator is turned on. Turn off Attenuator. ✔ The fader or balance settings are set all the way to one side. Reset the fader and/or balance settings. ✔ The input/output wires or wiring harness are connected incorrectly.

  • Page 70: Specifications

    Specifications Specifications subject to change without notice. Monitor section Picture size : 6.95 inches wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99% Pixel arrangement : RGB striped arrangement Back lighting...

  • Page 71

    FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Comments to this Manuals

Symbols: 0
Latest comments: