Tape Player Control Function; Tape Player Control Screen; Listening To The Other Side; Direct Program Search System(Dpss) - Kenwood VZ-7000N Instruction Manual

Tape Player Control Function

Tape Player Control Screen

ATT
P L A Y
B . N R

Listening to the Other Side

Touch [ 2 3 ].
Tape play switches to the other side.

Direct Program Search System(DPSS)

Skip backward and forward to other tracks during
playback.
Skipping to the Beginning of Current Track or to
Previous Tracks (Rewind DPSS):
Touch [ 4 ].
Touch once to rewind to the beginning of the current
track, twice to rewind to the beginning of the previous
track, and so forth.
You can skip up to nine tracks.
Playback is continued after the tape is rewound by the
indicated number of tracks.
Skipping to the Later Tracks (Fast Forward DPSS):
Touch [ ¢ ].
Touch once to fast forward to the next track, twice to
fast forward to the track after that, and so forth.
You can skip up to nine tracks.
Playback is continued after the tape is fast forwarded
by the indicated number of tracks.
NOTE
The DPSS function "knows" where a track begins by
detecting the blank space preceding it (the space
between tracks). However, when the blank space
lasts for less than four seconds or contains noise,
DPSS may not operate correctly. Furthermore, quiet
intervals within a song are detected as "blank spaces"
if they last for four seconds or more.

Fast Forwarding the Tapes

Touch [ 33 ].
The tape is being fast forwarded.
If the [ 2 3 ] is touched, normal tape will begin.

Rewinding the Tapes

Touch [ 22 ].
The tape is being rewound.
If the [ 2 3 ] is touched, normal tape play will begin.

Switching to the Next Source Mode

Touch [SRC] to switch to the next source control
screen.

Switching to the Menu Screen

Touch [ MENU ] to switch to the menu screen.

Turning the Attenuator On/Off

Turn down the volume quickly.
Touch [ ATT ] to switch the Attenuator on and off.
20
S R C
T A P E
9 9 9 9
1 2 : 0 0
M T L REP
MENU