Kenwood VZ-5000 Instruction Manual page 15

Installation for Monitor Unit
When mounting the main unit after checking the operation, close the monitor first.
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction.
Metal mounting strap
(commercially available)
Screw (M4X6)
(commercially
available)
Self-tapping screw
(commercially available)
■
Installing in Japanese-Made Cars-1
When the vehicle bracket is attached as in Toyota, Nissan,
Mitsubishi, and other vehicles that use a hole in the ● position
in the figure below.
Accessory B or Accessory C
Screw (Provided with the
Audio Unit.etc)
Firewall or metal support
or
Audio Unit.etc
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Not use the Hard Rubber Frame
N
T
T: Toyota cars
N: Nissan cars
AccessoryB...for Toyota car
AccessoryC...for Nissan car
Accessory B or Accessory C
Screw (Provided with the Audio Unit.etc)
T/N
English 15