Dell PowerEdge C8000 Hardware Owner's Manual page 40

Error Error Message
Code
002Eh Microcode
Update Error
002Fh No Microcode
Be Updated
8012h SATA 0 Device
Not Found
8013h SATA 1 Device
Not Found
8014h SATA 2 Device
Not Found
40
About the System
Response Error Cause
Pause Processor
microcode
update error
Pause Processor
microcode load
failed
Pause SATA 0 device
not found
Pause SATA 1 device
not found
Pause SATA 2 device
not found
Corrective Actions
Check microcode. A BIOS
update is required.
If the problem persists, see
"Getting Help" on page 187.
Ensure that your processors
match and conform to the
type described in the
processor technical
specifications outlined in
your system's Getting Started
Guide.
Check if the SATA port 0 is
enabled. See "SATA
Configuration" on page 83.
Install a SATA device to SATA
port 0.
If the problem persists, see
"Getting Help" on page 187.
Check if the SATA port1 is
enabled. See "SATA
Configuration" on page 83.
Install a SATA device to SATA
port 1.
If the problem persists, see
"Getting Help" on page 187.
Check if the SATA port 2 is
enabled. See "SATA
Configuration" on page 83.
Install a SATA device to SATA
port 2.
If the problem persists, see
"Getting Help" on page 187.