Dell PowerEdge C8000 Hardware Owner's Manual page 116

Table 2-1. D4 Token Table
Token Setup Option
02CA QPI Bandwidth
Priority
02CE DCU IP
Prefetcher
02CF DCU IP
Prefetcher
401A Terminal Type
401B Terminal Type
401C Redirection After
BIOS POST
401D Redirection After
BIOS POST
4022 1st Boot Device
4026 Manufacturing
Mode
116
Using the System Setup Program
(continued)
Description
Sets to I/O for I/O-intensive applications.
Enables the DCU IP Prefetcher. (default)
Disables the DCU IP Prefetcher.
The BIOS console redirection, if enabled, operates in
VT100 emulation model. See tokens BFh, C0h, and
D7h.
The BIOS console redirection, if enabled, operates in
ANSI emulation model. See also tokens BFh, C0h,
and D7h.
The BIOS console redirection, if enabled, continues to
operate after the OS boot hand-off.
The BIOS console redirection, if enabled, operates
during the BIOS boot only and is disabled prior to OS
boot hand-off. See also tokens BFh, C0h, D7h, 401Ah
and 401Bh.
Whenever the BIOS boots the system, the first PXE-
capable device is inserted as the first device in the
boot sequence. Enabling this feature causes the BIOS
operation to occur on the next and all subsequent
boots and causes a change in the system's defined
boot sequence. The BIOS chooses the first PXE-
capable device as the system's onboard network
controller, if present and enabled, or the first bootable
network device found in the system's standard PCI
search order.
Enables the manufacturing mode to bypass POST
tasks/memory tests and F1/F2 prompts on specific
error messages. Used by manufacturers only and is not
for general use.