Dell PowerEdge C8000 Hardware Owner's Manual page 118

Table 2-1. D4 Token Table
Token Setup Option
480C L3 Cache Power
Control
480D L3 Cache Power
Control
480E C7 State
480F C7 State
4810 Non Coherent
HT Link Width
4811 Non Coherent
HT Link Width
4812 Non Coherent
HT Link Speed
4813 Non Coherent
HT Link Speed
4814 Non Coherent
HT Link Speed
4815 Non Coherent
HT Link Speed
4816 Non Coherent
HT Link Speed
4817 Non Coherent
HT Link Speed
4820 Memory Turbo
Mode
4821 Memory Turbo
Mode
4822 NUMA Support
118
Using the System Setup Program
(continued)
Description
Disable the clock stop for an idle subcache.
Enable the clock stop for an idle subcache.
Disables the processor C7 state. Do at your own risk.
When you disable this option, a warning appears in
the BIOS Setup help text and a pop up message
appears when this option is changing.
Enables the processor C7 state. (default)
Sets the HT link to 8 bit width.
Sets the HT link to 16 bit width.
Sets the HT link speed to 800MHz.
Sets the HT link speed to 1000MHz.
Sets the HT link speed to 1200MHz.
Sets the HT link speed to 1600MHz.
Sets the HT link speed to 2000MHz.
Sets the HT link speed to 2600MHz.
Disables memory turbo mode.
Enables memory turbo mode.
Enables the node interleave option for SLES11. This
applies to NUMA systems that allow memory
interleaving across all processor nodes.