Dell PowerEdge C8000 Hardware Owner's Manual page 112

Table 2-1. D4 Token Table
Token Setup Option
01DA Embedded NIC1 Enables NIC1 with iSCSI Remote Boot.
01DB Embedded NIC2 Enables NIC2 with iSCSI Remote Boot.
01EA Turbo Mode
01EB Turbo Mode
01F0 Embedded NIC3 Enables the onboard NIC3 controller.
01F1 Embedded NIC3 Enables the onboard NIC3 controller, but disables the
01F2 Embedded NIC3 Enables the onboard NIC3 controller (full-function),
01F3 Embedded NIC3 Enables NIC3 with iSCSI Remote Boot.
0204 VT for Direct I/O Disables Intel Virtualization Technology for Direct
0205 VT for Direct I/O Enables Intel Virtualization Technology for Direct I/O
0211 Internal USB
PORT
0212 Internal USB
PORT
021F Maximum
Performance
0221 OS Control
0224 Embedded Video
Controller
0225 Embedded Video
Controller
022D Boot Mode
112
Using the System Setup Program
(continued)
Description
Disables memory turbo mode. It disables the
processor core to increase its frequency.
Enables memory turbo mode. It allows the processor
core to increase its frequency.
NIC associated PXE or RPL boot-ROM.
including its PXE boot-ROM.
I/O (VT-d) that enhances I/O support (DMA) when
running a Virtual Machine Monitor.
(VT-d) that enhances I/O support (DMA) when
running a Virtual Machine Monitor.
Disables the internal USB connector.
Enables the internal USB connector.
Sets the system power management to maximum
performance.
Allows the OS to change the P-state.
Enables the onboard video controller as the primary
video device.
Disables the onboard video controller.
Enables booting to Unified Extensible Firmware
Interface (UEFI) capable operating systems.