Dell PowerEdge C8000 Hardware Owner's Manual page 108

Table 2-1. D4 Token Table
Token Setup Option
00BB Embedded NIC2 Enables the onboard NIC2 controller, but disables the
00BC Embedded NIC2 Enables the onboard NIC2 controller (full-function),
00BF Remote Access
00C0 Serial port
number
00C1 Power Button
00C2 Power Button
00D1 Hyper-Threading
Technology
00D2 Hyper-Threading
Technology
00D7 Serial port
number
00D8 Load Optimal
Defaults
00FE Legacy USB
Support
00FF Legacy USB
Support
0117 SATA Port0
0118 SATA Port0
0119 SATA Port1
011A SATA Port1
108
Using the System Setup Program
(continued)
Description
NIC associated PXE or RPL boot-ROM.
including its PXE boot-ROM.
Disables serial console redirection.
Enables console redirection via COM1. See token
D7h.
Enables the power button to turn off the system
power. (default)
Disables the power button to turn off the system
power.
Enables Hyper-Threading Technology.
Disables Hyper-Threading Technology.
Enables console redirection via COM2.
Install optimal default settings for all the items in the
Setup utility on the next boot.
Disables the system to provide legacy USB support for
the operating system.
Enables the system to provide legacy USB support for
the operating system.
Turns off the 1st Serial ATA drive controller.
Enables BIOS support for the 1st Serial ATA drive
controller (enabled if present, POST error appears if
not present).
Turns off the 2nd Serial ATA drive controller.
Enables BIOS support for the 2nd Serial ATA drive
controller (enabled if present, POST error appears if
not present).