Dell PowerEdge C8000 Hardware Owner's Manual page 24

Item Indicator, Button, or
Connector
5 Power on indicator/
power button
6 VGA connector
7 Serial connector
8 BMC management
port
9 Ethernet connector 2
10 Ethernet connector 1
11 Sled identification
indicator
12 Handle
24
About the System
Icon Description
The power-on indicator lights when the
sled power is on.
The power-on indicator lights amber when
the system critical event occurs.
The power button turns the compute sled
on.
NOTE:
When powering on the sled, the
video monitor can take from several
seconds to over 2 minutes to display an
image, depending on the amount of memory
installed in the system.
NOTE:
On ACPI-compliant operating
systems, turning off the sled using the
power button causes the sled to perform a
graceful shutdown before power to the sled
is turned off.
NOTE:
To force an ungraceful shutdown,
press and hold the power button for five
seconds.
Connects a VGA display to the system.
Connects a serial device to the system.
Dedicated management port.
Embedded 10/100/1000 Mbit NIC
2
connector.
Embedded 10/100/1000 Mbit NIC
1
connector.
Lights blue to identify a particular sled
and system board.
Hold to pull the sled from the enclosure.