Change Feature Options - AT&T E5943 User Manual

SETUP
1.
Press until desired feature
is heard (see list at right).
2. CHANGE
Press until desired selec-
tion is heard.
3.
SETUP
Press to set selection and
move to next menu option.
-OR-
( Stop)
Play/
Press to set selection and
exit setup.
NOTES:
1. To temporarily disable the
message alert tone, press any
answering machine key (
TIME/
SET, SETUP, CHANGE, REC/
MEMO, PLAY/STOP, DELETE,
and ) on the base.
REPEAT SKIP
This turns off the audio message
alert tone but the number in the
message window will continue
to flash as a reminder that there
are unreviewed messages on the
answering system. The message
alert tone will be re-activated
with the next incoming message.
2. To switch off the message
alert tone for all incoming mes-
sages, read the section on disa-
bling the message alert function
in the list on the right.
3. Press and hold to
CHANGE
advance the remote access code
number by 10.

Change feature options

You can change how the answering system oper-
ates. Press repeatedly to hear each feature.
SETUP
Press when you hear the feature you want
CHANGE
to modify.
Feature options (default settings underlined)
System announces:
"Announcement. Press
PLAY or press RECORD.
To continue setup, press
SETUP."
Options: [record announce-
ment]
"Remote access code. To
change the setting press
CHANGE."
Options: [enter two-digit
code] 19
"Message alert. To change
the setting press CHANGE."
Options: On / Off
"Announcement only,
record no messages. To
change the setting press
CHANGE."
Options: On / Off
"Call screening. To change
the setting press CHANGE."
Options: On / Off
"Number of rings. To
change the setting press
CHANGE."
Options: 2 / 4 / 6 /Toll Saver
34
Feature description:
Press REC to record your
/MEMO
outgoing announcement (see page
32). Press STOP to stop
PLAY/
recording.
Enter a two-digit number (10-99) for
remote access from another phone
(see page 38).
When the answering system is turned
on (the light is lit)
ANSWER ON/OFF
and the message alert function is acti-
vated, any new incoming message will
increase the flashing number in the
message window by one, and a beep
tone will sound every ten seconds as
a reminder that there are unreviewed
messages on the answering system.
When on, callers hear an announce-
ment but cannot leave messages (see
page 33).
When on, you can hear callers leave
messages, or answer the call.
Choose number of rings before the
system answers a call. When toll saver
is active, the system answers after
two rings if you have new messages,
and after four rings if you have no new
messages.