Intercom Calls - AT&T E5943 User Manual

5.8 ghz cordless telephone/answering system with caller id/call waiting
Table of Contents

Advertisement

Press INTERCOM.
Select a station to page.
INTERCOM TO:
NOTE: The intercom fea-
ture cannot be used while a hand-
set is in the directory or call log.
Pressing
while on
INTERCOM
an outside call will initiate call
transfer (see page 17). Pressing
and holding
while
INTERCOM
on an outside call will initiate call
forward (see page 16).
Telephone operation

Intercom calls

Intercom calls
If you have more than one handset, use the inter-
com feature to have conversations between the
handsets and base.
• Press the
INTERCOM
INTERCOM
HANDSET LOCATOR/
ate an intercom call.
• After entering the number of the handset (1-4
or 0 for the base) you wish to intercom with,
your handset (or base) will call the other hand-
set (or base).
To answer the intercom call:
• At a handset, press
,
or any dial pad key (0-9, * or
SPEAKER
FLASH
#).
• At the base, press
or any dial pad key (0-9, * or #).
SPEAKER
To end the intercom call:
• At a handset, press
or place the handset in a charger or base.
• At the base, press
Handling incoming calls
The phone will beep if you receive an outside call
during an intercom conversation. You can either:
• Press
PHONE
FLASH
intercom call and answer the incoming call.
-OR-
• Press
INTERCOM
set or
HANDSET LOCATOR/
to disconnect the intercom connection without
answering the incoming call. The incoming call
will continue to ring.
15
15
button on a handset or
on the base to initi-
,
INTERCOM
PHONE
INTERCOM
HANDSET LOCATOR/
or
OFF
INTERCOM
CLEAR
INTERCOM
HANDSET LOCATOR/
or
to end the
SPEAKER
or
on the hand-
OFF
CLEAR
on the base
INTERCOM
,
,
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5944E5943bE5944b

Table of Contents