Message Counter Displays - AT&T E5640 User Manual

91-000353-050-000_E5640 CIB_R2.qxd
Message counter
10/26/2005 12:05 PM
Answering System Operation

Message counter displays

The message counter usually displays the total number of
memos and incoming messages. See the list below for
explanations of other displays in this counter.
Message counter displays
0
No messages.
1-98
Number of messages/memos, or message number
currently playing (flashes if you have new mes-
sages).
10-99
Current remote access code while setting
(see page 31).
1-8
Current volume level while adjusting.
1-99 (counting)
Elapsed time while recording a memo (see page 33)
or announcement up to 90 seconds (page 29).
99 (flashing)
Memo recording exceeded 99 seconds.
F (flashing)
Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing)
Clock needs to be set (see page 28).
A
Announce only mode is on (see page 30).
--
System is answering a call, or being accessed
remotely.
-- (flashing) System is being programmed or initialized.
On (or) OF
Displayed for one second when any answering
system setting is turned on or off.
02 , 04 , 06 , tS
Current number of rings while setting (see page
31).
34
Page 34