Handset Settings - AT&T E5640 User Manual

91-000353-050-000_E5640 CIB_R2.qxd
Highlighted
menu item
> DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
10/26/2005 12:03 PM
Telephone Operation

Handset settings

At the feature menu you can change settings to
customize how the telephone works.
Press , then use the
MENU
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press
SELECT
Press at any time to cancel an operation, back up
OFF
to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a ring volume level (1-6), or
turn the ringer off ( 0 ). Use the
an example of each volume level, then press
select the one you prefer.
NOTE: The ringer volume level also determines the levels of ringing for
intercom calls (see page 16) and the paging tone when initiating the Handset
Locator feature (see page 13). If the handset ringer volume level is set to off
(0), that handset is silenced for all calls and paging.
Ringer volume can also be temporarily adjusted by
pressing on the side of the handset during
VOLUME
incoming ringing.
The next call will ring normally.
Ringer tone
This feature allows you to choose one of 10 ringing
^V
tones. Use the buttons to hear an example of
each ringer tone, then press
you prefer.
Key tone
The handset is factory programmed to beep at each key
^V
press. Use the buttons to select
then press to save your preference.
SELECT
NOTE: If you select OFF, you will not hear a beep when you press
keys.
18
Page 18
^V
buttons to scroll to
to select the highlighted item.
^V
buttons to hear
SELECT
to select the one
SELECT
or
ON OFF
to
,