Advertisement
3Com Switch 4200G Family
Command Reference
snmp-agent mib-view
Use the
snmp-agent mib-view
to be accessed by the NMS.
snmp-agent packet max-size
Use the
snmp-agent packet max-size
can send/receive.
snmp-agent sys-info
Use the
snmp-agent sys-info
the device, contact information for system maintenance and version information of running SNMP.
snmp-agent target-host
Use the
snmp-agent target-host
snmp-agent trap enable
Use the
snmp-agent trap enable
snmp-agent trap life
Use the
snmp-agent trap life
snmp-agent trap queue-size
Use the
snmp-agent trap queue-size
sent to the destination host.
snmp-agent trap source
Use the
snmp-agent trap source
snmp-agent usm-user
Use the
snmp-agent usm-user
a new user to an SNMP group.
snmp-agent usm-user
Use the
snmp-agent usm-user
use this command to apply an ACL to filter network management users.
snmp-agent usm-user
Use the
snmp-agent usm-user
snmp-agent usm-user
Use the
snmp-agent usm-user
a new user to an SNMP group.
snmp-host
Use the
snmp-host
management device.
speed
Use the
speed
speed
Use the
speed
ssh client assign rsa-key
Use the
ssh client assign rsa-key
connected to guarantee the client can be connected to a reliable server.
command to create or update the view information, limiting the MIB objects
command to set the maximum size of SNMP packet that the Agent
command to configure system information such as geographical location of
command to command to configure destination of SNMP Trap packets.
command to enable the device to send Trap packets.
command to set aging time for Trap packets.
command to configure the information queue length of a Trap packet
command to configure the source address for sending Trap messages.
command to add a new community name or, if you use the V3 parameter,
command to add a new user to an SNMP group. You can also optionally
command to add a new user to an SNMP group.
command to add a new community name or, if you use the V3 parameter,
command to configure an SNMP host for the member devices inside a cluster on the
command to set the transmission speed of the user interface.
command to configure the port rate.
command to specify on the client the public key for the server to be
35
System view
System view
System view
System view
System view
System view
System view
System view
System view
System view
System view
System view
Cluster view
User Interface view
Ethernet Port view
System view
Advertisement
