Download Print this page

3Com 4200G PWR Quick Reference Manual page 40

4200g family
Hide thumbs Also See for 4200G PWR:

Advertisement

40
tftp put
Use the
tftp put
tftp-server
Use the
tftp-server
device.
tftp-server acl
Use the
tftp-server acl
between a TFTP client and a TFTP server.
time-range
Use the
time-range
timer
Use the
timer
timer
Use the
timer
response timeout timer of RADIUS server).
timer quiet
Use the
timer quiet
timer realtime-accounting
Use the
timer realtime-accounting
timer response-timeout
Use the
timer response-timeout
topology accept
Use the
topology accept
as a standard topology.
topology restore-from
Use the
topology restore-from
the local flash.
topology save-to
Use the
topology save-to
tracemac
Use the
tracemac
tracert
Use the
tracert
the source to the destination.
The
tracert
trouble spot of the network.
traffic-limit
Use the
traffic-limit
matching with the ACL rules and to set traffic policing parameters.
traffic shape
Use the
traffic-shape
command to upload a file from the switch to the specified directory on the TFTP server.
command to configure a TFTP server for cluster members on the management
command to specify the ACL (Access Control List) adopted for the connection
command to define a time range.
command to set the interval to send handshake packets.
command to set the response timeout time of RADIUS server (that is, the timeout time of the
command to set the wait time for the primary server to restore the active state.
command to set the real-time accounting interval.
command to set the response timeout time of RADIUS servers.
command to confirm the current topology information of the cluster and save that
command to obtain and restore the standard topology information from
command to save the standard topology information into the local flash.
command to locate a device by MAC address or IP address.
command to trace the gateways the test packets passes through during its journey from
command is primarily used to check the network connectivity. It can also help you locate the
command to use ACL rules in traffic identifying and traffic policing for the packet
command to enable traffic shaping and send the packets out at an even rate.
3Com Switch 4200G Family
Command Reference
User view
Cluster view
System view
System view
Cluster view
RADIUS Scheme view
RADIUS Scheme view
RADIUS Scheme view
RADIUS Scheme view
Cluster view
Cluster view
Cluster view
Any view
Any view
Ethernet Port view
Ethernet Port view

Advertisement

loading