Advertisement
12
display ip socket
Use the
display ip socket
display ip statistics
Use the
display ip statistics
display isolate port
Use the
display isolate port
isolation group.
display lacp system-id
Use the
display lacp system-id
MAC address.
display link-aggregation interface
Use the
display link-aggregation interface
specified port or port range.
Use the
display link-aggregation interface
specified port or port range, including:
display link-aggregation summary
Use the
display link-aggregation summary
groups, including device ID of the local end, aggregation group ID, aggregation group type, device ID of the
remote end, number of the selected ports, number of the unselected ports, load sharing type and master
port number.
display link-aggregation verbose
Use the
display link-aggregation verbose
aggregation group.
display local-server statistics
Use the
display local-server statistics
authentication server.
display local-user
Use the
display local-user
one(s).
display logbuffer
Use the
display logbuffer
buffer.
display logbuffer summary
Use the
display logbuffer summary
display-loopback-detection
Use the
display loopback-detection
display mac-address
Use the
display mac-address
display mac-address aging-time
Use the
display mac-address aging-time
MAC address table.
display mac-address multicast static
Use the
display mac-address multicast static
manually configured on the switch, with each entry containing the following information: multicast MAC
address, VLAN ID, MAC address state, port number(s), and aging time of each port.
command to display the information about the sockets in the current system.
command to view the statistics information about IP packets.
command to display the information about the Ethernet ports added to an
command to view actor system ID, including system priority and system
command to display the link aggregation details about a
command to display the link aggregation details about a
command to display summary information of all aggregation
command to display the details about a specified
command to view the statistics of all local RADIUS
command to view information about all the local users or the specified
command to display the status of the log buffer and the records in the log
command to display the summary of the log buffer.
command to display the loopback detection status on the port.
command to display MAC address table information.
command to display the aging time of the dynamic entry in the
command to display the multicast MAC address entries
3Com Switch 4200G Family
Command Reference
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Any view
Advertisement
