Advertisement
22
ip address dhcp-alloc
Use the
ip address dhcp-alloc
DHCP.
ip host
Use the
ip host
ip http acl
Use the
ip http acl
ip-pool
Use the
ip-pool
be set as the management device.
ip route-static
Use the
ip route-static
Use the
ip route-static
as follows: valid when the detecting result is reachable or invalid when the detecting result is unreachable.
ip route-static
Use the
ip route-static
as follows: valid when the detecting result is reachable or invalid when the detecting result is unreachable.
key
Use the
key
accounting packets.
lacp enable
Use the
lacp enable
lacp port-priority
Use the
lacp port priority
lacp system-priority
Use the
lacp system-priority
language-mode
Use the
language-mode
of the command line interface (CLI) to meet your requirement.
lcd
Use the
lcd
level
Use the
level
link-aggregation group description
Use the
link-aggregation group description
link-aggregation group mode
Use the
link-aggregation group mode
local-server
Use the
local-server
local-user
Use the
local-user
command to configure VLAN interface to obtain an IP address using
command to configure a host name and the corresponding IP address for a switch.
command to apply an ACL to filter Web users.
command to configure a private IP address range for cluster members on the switch to
command to configure a static route.
command to configure a static route, whose validity depends on detecting results
command to configure a static route, whose validity depends on detecting results
command to specify a shared key for the RADIUS authentication/authorization packets or
command to enable the LACP protocol on the current port.
command to configure port priority value.
command to configure system priority value.
command to toggle between the language modes (that is, language environments)
command to display the local work directory on the FTP client.
command to set the priority level of the user.
command to create a manual or static aggregation group.
command to configure the parameters of local RADIUS server.
command to add a local user and enter local user view.
command to set a description for an aggregation group.
3Com Switch 4200G Family
Command Reference
VLAN Interface view
System view
System view
User Interface view
Cluster view
System view
System view
RADIUS Scheme view
Ethernet Port view
Ethernet Port view
System view
User view
FTP Client view
Local User view
System view
System view
System view
System view
Advertisement
