Advertisement
3Com Switch 4200G Family
Command Reference
acl
Use the
acl
acl
Use the
acl
active region-configuration
Use the
active region-configuration
tree) region.
add-member
Use the
add-member
address-check
Use the
address-check
start or stop the validity check on user addresses under the VLAN interface.
administrator-address
Use the
administrator-address
member device.
am user-bind
Use the
am user-bind
apply qos-profile
Use the
apply qos-profile
apply qos-profile interface
Use the
apply qos-profile interface
consecutive ports.
arp check enable
Use the
arp check enable
from creating multicast MAC address ARP entries for MAC addresses learned.
arp static
Use the
arp static
arp timer aging
Use the
arp timer aging
ascii
Use the
ascii
attribute
Use the
attribute
authentication
Use the
authentication
authentication-mode
Use the command
authorization
Use the
authorization none
without being authorized.
command to reference ACL and implement the ACL control to the TELNET users.
command to define an ACL identified by a number, and enter the corresponding ACL View.
command to activate the settings of an MST (multiple spanning
command to add a candidate device to a cluster.
command to enable or disable DHCP relay security on a VLAN interface, so as to
command to store the MAC address of the management device on a
command to bind the MAC and IP addresses of a legal user to a specified port.
command to manually apply the QoS profile to the current port.
command to manually apply a QoS profile to one or more
command to enable the ARP entry checking function, that is, to disable a switch
command to configure the static ARP mapping entries in the ARP mapping table.
command to configure the aging time for dynamic ARP mapping entries.
command to configure data transmission mode as ASCII mode.
command to configure attributes of a user whose service type is lan-access.
command to configure an authentication scheme for the current ISP domain.
authentication-mode
command to allow users in the current ISP domain to use network services
to specify the authentication mode.
3
User Interface view
System view
MST Region view
Cluster view
VLAN Interface view
Cluster view
System view
Ethernet Port view
Ethernet Port view
System view
System view
System view
System view
FTP Client view
Local User view
ISP Domain view
User Interface view
ISP Domain view
Advertisement
