Advertisement
3Com Switch 4200G Family
Command Reference
reset counters interface
Use the
reset counters interface
statistics collection.
reset dot1x statistics
Use the
reset dot1x statistics
reset garp statistics
Use the
reset garp statistics
packets received/sent/discarded by GVRP/GMRP) on specified (or all) ports.
reset igmp-snooping statistics
Use the
reset igmp-snooping statistics
reset ip statistics
Use the
reset ip statistics
reset logbuffer
Use the
reset logbuffer
reset ndp statistics
Use the
reset ndp statistics
reset radius statistics
Use the
reset radius statistics command
reset recycle-bin
Use the
reset recycle-bin
reset saved-configuration
Use the
reset saved-configuration
attribute from the Flash, including the main and backup configuration files to be used when the switch starts
the next startup.
reset stop-accounting-buffer
Use the
reset stop-accounting-buffer
request packets.
reset stp
Use the
reset stp
reset tcp statistics
Use the
reset tcp statistics
reset traffic-limit
Use the
reset traffic-limit
specified ACL rules.
reset traffic-statistic
Use the
reset traffic-statistic
specified ACL rules.
reset trapbuffer
Use the
reset trapbuffer
retry
Use the
retry command
command to clear the statistics of the port, preparing for a new
command to clear the statistics of 802.1x.
command to clear the GARP statistics (such as the information about the
command to clear the IGMP Snooping statistics.
command to clear the IP statistics information.
command to clear information in the log buffer.
command to reset the NDP counters to clear the NDP statistics.
to clear the statistics information about the RADIUS protocol.
command to completely delete file(s) in the recycle bin in the Flash.
command to delete the configuration file that is of the specified
command to delete the buffered no-response stop-accounting
command to clear the STP statistics of specified Ethernet ports.
command to clear the TCP statistics information.
command to clear the statistics of the traffic policing matching with the
command to clear the traffic statistics of the packets matching with the
command to clear information in the trap buffer.
to set the maximum number of transmission attempts of RADIUS requests.
31
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
Ethernet Port view
Ethernet Port view
User view
Detecting Group view
Advertisement
