Discarding Rtp Information; Handling Jobs In The Storage Window - Xerox DocuColor 252 User Manual

62

Discarding RTP Information

Handling Jobs in the Storage Window

If you click the Completed Jobs button again, the button is pushed in and the list
shows the completed jobs.
Note: When all the status buttons are in the released (unselected) position,
The Storage window shows no jobs.
The RTP information can be discarded if desired. Under some circumstances, it is
necessary to discard RTP data—for example when you want to re-RIP a file, archive
a job without the RTP information, or edit tabs.
To discard RTP information from a job:
In the Storage window, right-click the relevant job and select Revert to source.
The RTP data is discarded and the file returns to its original format—for example,
PostScript.
In the Storage window you can perform the following actions:
•
Submit a job. See Submitting Jobs on page 63.
•
Preview and edit a job, using the Job Editor. See Job Editor on page 78.
•
View and edit the parameters of a job. See Viewing and Editing Job Parameters on
page 60.
•
Unlock a job. See Unlocking a Job on page 59.
•
Archive a job. See Archiving and Retrieving Jobs on page 64.
•
Duplicate a job. See Duplicating Jobs on page 63.
•
Delete a job. See Deleting a Job on page 60.
•
View a job's history (in the Job History window). See Viewing a Job's History on
page 66.
•
Export a job as a PDF file.
Chapter 3 – Overview of Spire CX260