Xerox DocuColor 252 User Manual page 30

22
Copying the Spire CX260 PPD File for Mac OS X
To print from your Macintosh computer to the Xerox DocuColor 242/252/260
printer/copier, you first need to manually copy the Spire CX260 PPD file to the
Macintosh.
To copy the PPD file:
1. From the Go menu, select Connect to Server.
The Connect to Server dialog box appears.
2. Locate the desired Spire CX260 in the network and then double-click it.
3. In the Connect to Server dialog box, select Guest.
4. Click Connect.
5. Select the Utilities volume, and click OK.
6. On the desktop, double-click the Utilities volume icon.
7. Double-click the PPD folder.
8. Double-click the desired language folder.
9. Double-click the desired computer type folder:
•
If you are using Mac OS 9, select MAC
•
If you are using Mac OS X 10.4 or later, select MacOSX
10. Double-click the desired location folder—for example, US-Letter.
11. Locate the CX260_V2.PPD file. It is recommended that you copy the PPD file
by dragging it to the specified folder in your local disk. To do this, open another
Finder window.
12. From the Go menu, select Computer.
13. Click your disk icon, and locate the required folder—for example,
Library\Printers\PPDs\Contents\Resources.
14. Select the desired language folder—for example, en.lproj for English.
15. Drag the CX260_V2.PPD file to the language folder.
Setting the Network Printer for Mac OS X (10.4 or Later)—IP, SMB,
or Appletalk
Note: Some of the steps in this procedure may be different if you are using a
version older than Mac OS X 10.4.
1. Make sure that the Spire CX260 PPD file has been copied to the correct folder
on your client workstation.
For more information about copying the PPD file, see Copying the Spire CX260
PPD File for Mac OS X on page 22.
2. From the Go menu, select Applications.
3. Open the Utilities folder and then double-click Printer Setup Utility.
4. Click Add Printer button.
5. Select either Default Browser or IP Printer.
Chapter 2 – Getting Started