Xerox DocuColor 252 User Manual page 137

Calibration
8. Set the number of copies you need by typing the number or using the arrows
next to the box to select the number.
Note: Since the performance of the Xerox DocuColor 242/252/260
printer/copier is best after several pages have been printed, it is
recommended that you print at least 10 copies of the first calibration chart
and use one of the last copies printed.
9. Click Print.
The Start Point Density calibration chart is printed.
Automatic
Note: If you selected
wizard, the Xerox DocuColor 242/252/260 printer/copier prints two
charts, an Image Density Calibration chart and a Text/Line Art chart.
10. Collect the chart(s) from the printer.
Step 2 of the Color Calibration Wizard appears. In this step you scan the start
point chart so that the wizard can measure each separation and find the point at
which the toner appears on the paper.
Screening Method
as the
129
in Step 1 of the