Setting-Up The Volume Lock; Unlocking The Volume - RCA RCU810 - Learning Universal Remote Control User Manual

RCU810_MANUAL.QXD 1/7/02

Setting-Up The Volume Lock

This programming mode will lock the volume with devices that have volume control. This
function is different from the MUTE key function. With this programming feature the volume
of your device will be locked at desired level. You may need to experiment with your system
since manufacturers products do not all work the same way.
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Step through the programming menu using the
UP ( ) key or DOWN ( ) key for VOL LOCK,
then press the SELECT key.
3. The display message TO MODE will show for you to
enter the device to apply the volume lock.
4. Push the device key of your choice to apply the
VOL LOCK mode.
5. If the entered device is a valid one, a SUCCESS
message will be displayed and the remote will
automatically exit the Volume Lock mode with a
final message EXIT SETUP.
NOTES:
• If any key other than the TV, VCR1, VCR2, CBL, SAT, DVD,
AUD & AUX, devices are selected, an error message INVALID
will be displayed, and the remote will remain in the Volume
unlock programming mode.

Unlocking The Volume

The Volume Unlock mode will apply if the Volume Lock has been activated.
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Step through the programming menu using the
UP ( ) key or DOWN ( ) key for VOL UNLOCK,
then press the SELECT key.
3. Once the SELECT key has been entered, the remote
will be reset back to volume unlock mode followed
by a message UNLOCKED.
4. An EXIT SETUP message will appear and the remote
will return to its normal operation.
NOTE:
• Press the CLEAR key at any time to exit the programming
mode. An EXIT SETUP message will appear and the remote
will return to its normal operation.
11:49 AM Page 17
16