Operating Audio Functions - RCA RCU810 - Learning Universal Remote Control User Manual

RCU810_MANUAL.QXD 1/7/02

Operating Audio Functions

This remote does not work all brands of audio equipment. See pages 12 and 13 for the Audio
code and brand lists to operate your brand of equipment. You may need to experiment with
your system since manufacturers products do not all work the same way.
TURNING ON THE RECEIVER OR MINI-SYSTEM
Point the remote control at the receiver and press the AUDIO key. The receiver should turn on.
In some cases, it may require pressing the AUDIO key and then the ON•OFF key to turn the
system on.
SELECTING THE DEVICE INPUT
Depending on the features of your receiver or mini-system, the device inputs such as CD or
TAPE may be selected. Input selection may be made either by pressing the labeled digit keys,
or by pressing FUNCTION key to scroll through the inputs available on your system.
USING THE NUMBER KEYS TO CHANGE AUDIO DEVICES
To select a device, press the number key (1-6) that corresponds
with the device you want to operate (CD, TAPE, TUNER, TV,
VIDEO1, VIDEO2).
USING THE FUNCTION KEY TO CHANGE AUDIO DEVICES
To select a device, press the FUNCTION key until the input you
want to operate appears on your system.
OPERATING A CD PLAYER OR TAPE DECK
Use the PLAY, REW, FWD, RECORD, STOP & PAUSE keys for
CD player and tape decks. In some cases, the Preset keys
(CH+ / CH-) may work in changing tracks on your CD player.
OPERATING THE AM•FM TUNER
1. Press the AUDIO key.
2. Press the TUNER key.
3. Press the AM•FM key to switch between AM and FM.
4. Use the CH+ or CH- keys to move up and down channel
presets.
OPERATING A HOME THEATRE SURROUND SOUND SYSTEM
With RCA receivers, a second press of the TV key should turn
the receiver on.
1. Turn the TV on.
2. Press the AUDIO key.
3. Select the Audio input either by using the labeled number key
of the FUNCTION key.
4. Press the VOL+ or VOL- keys to control the volume.
NOTE: The volume keys may operate both TV and receiver volume at
the same time. If this presents a problem, it may be resolved by
disabling the TV speakers by going into the TV menu.
CONTROLLING THE SURROUND SOUND FEATURES
The Surround Sound features may be turned ON/OFF by
pressing the SURR ON•OFF key.
• Press the SURR MODE key until the desired mode is found.
• Press the DELAY+ or DELAY- to achieve the desired delay effect.
• Press the DSP ON•OFF key to turn DSP (Digital Signal Processor) ON or OFF.
• Press the DSP key until the desired effect is achieved.
• Press the TEST key to listen to speaker levels.
• Press FRONT, CENTER or REAR keys to select speakers.
• Press LEVEL+ or LEVEL- keys to adjust speaker levels.
11:49 AM Page 23
22