Cf_Gamma Command; Cf_Coltemp Command - Canon LV-7555 Specifications

8.4.6

CF_GAMMA COMMAND

"CF_GAMMA_%1"[CR]
COMMAND
"000-015"------ Directly select for Gamma setting value
%1 "UP"---------------- Current setting value +1
"DN"---------------- Current setting value-1
Set the User Control Gamma Value.
The value set by this Command will not be saved to the projector.
Details Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays) Only valid when it is in the
usual Power On state.
Acceptable
Response
Unacceptable
8.4.7 CF_WBAL- COMMAND
"CF_WBAL-%1_%2"[CR]
COMMAND
"R" ------------- Red
%1 "G" ------------- Green
"B" ------------- Blue
"000-063"-- Directly select color value by White Balance %1 determination.
%2 "UP"------------ Color value for White Balance %1 determination +1
"DN"------------ Color value for White Balance %1 determination-1
Set the user control color value by white balance %1 determination.
The value set by this Command will not be saved to the projector.
Details Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
Response
Unacceptable
8.4.8

CF_COLTEMP COMMAND

"CF_COLTEMP_%1"[CR]
COMMAND
%1 "000"-"003"
Set the Color Temp.(When it is in usual Power ON state, this is valid.)
The value set by this Command will not be saved to the projector.
Details Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
Page 17 / 53