Canon LV-7555 Specifications page 11

5.4 Screen Series Command Table
Execute Command
CF_SCREEN_%1 [CR]
CF_FLSCREN_%1 [CR]
CF_TRUE_%1 [CR]
CF_DZCENT_%1 [CR]
CF_KEYSTONE_%1 [CR]
CF_KYSTNMODE_%1 [CR]
CF_ANAMORPHIC_%1 [CR]
CF_VSCALE_%1 [CR]
CF_VPOS_%1 [CR]
CF_HSCALE_%1 [CR]
CF_HPOS_%1 [CR]
5.5 Lamp Series Command Table
Execute Command
CF_LAMPH_%1 [CR]
CF_LAMPMODE_%1 [CR]
5.6 Sound Series Command Table
Execute Command
CF_VOLUME_%1 [CR]
CF_MUTE_%1 [CR]
CF_BLTINSP_%1 [CR]
5.7 Setting Series Command Table
Execute Command
CF_BBACK_%1 [CR]
CF_DISP_%1 [CR]
CF_LOGO_%1 [CR]
CF_CEIL_%1 [CR]
CF_REAR_%1 [CR]
CF_RCODE_%1 [CR]
CF_LANG_%1 [CR]
CF_ON-STA_%1 [CR]
CF_P-MANE_%1 [CR]
CF_FANSPEED_%1 [CR]
CF_KEYDIS_%1 [CR]
CF_FDEFAULT_%1 [CR]
5.8 Network Viewer Series Command Table
Execute Command
CF_NETCONNECT_%1 [CR]
CF_NETMODE_%1 [CR]
CF_NETVIEWAUTO_%1 [CR]
CF_NETVIEWINT_%1 [CR]
CF_NETVIEWCNT_%1 [CR]
CF_NETVIEWFUNC_%1 [CR]
CF_NETCONPC_%1 [CR]
CF_NETMOUSE_%1 [CR]
CF_NETSTATUS_%1 [CR]
Select Screen size.
Set or cancel for Full Screen.
Set or cancel for Screen True.
Cancel digital zoom.
Set Keystone.
Set Keystone store mode.
ON/OFF control for AnamorphiCFunction.
Set V Scale.
Set V Position.
Set H Scale.
Set H Position.
Reset lamp total running time.
Select lamp mode.
Set volume value.
Control Sound Mute ON/OFF.
Set Built-in Speaker ON/OFF.
Set Blue Back function.
Set Display function.
Set Logo function.
Set Ceiling function.
Set Rear function
Select Remote Control Reception Code
Select OSD language.
Set Power ON Start function.
Set Power management function.
Select fan speed.
RC/KEY inhibit
Set Factory Default.
Start Network connection/Network connection
termination
Set operation mode for Network
Set/Cancel for Network Viewer Auto Play.
Set time for Network Viewer Auto Play.
Set Network Viewer Auto Play repeat schedule
Control Network Viewer.
Set a PC to connect in Capture mode.
Set a mouse cursor in Capture mode.
Connection status for Network
Item
Item
Item
Item
Item
Page 11 / 53