Color. Management Command; Input 1 Analog Rgb Command; Input 1 Scart Command; Input 1 Dvi (Pc Digital) Command - Canon LV-7555 Specifications

MR3P Series Basic Serial Command Function Specification
‚ S .50

COLOR. MANAGEMENT Command

Command "C4E" [CR]
Set Color management to ON.
Detail
This command works the same as the remote control's "COLOR.M" button.
Acceptable
Response
Unacceptable
‚ S .51

INPUT 1 Analog RGB Command

Command "C50" [CR]
Detail Select Analog RGB Input for Input 1
Acceptable
Response
Unacceptable
‚ S .52

INPUT 1 SCART Command

Command "C51" [CR]
Detail Select Scart Input for Input1
Acceptable
Response
Unacceptable
‚ S .53 INPUT 1 DVI• i PC Digital • j Command
Command "C52" [CR]
Detail Select DVI (PC Digital) Input for Input 1.
Acceptable
Response
Unacceptable
‚ S .54 INPUT 1 DVI• i AV HDCP • j Command
Command "C53" [CR]
Detail Select DVI (AV HDCP) Input for Input 1.
Acceptable
Response
Unacceptable
‚ S .55

INPUT 1 Monitor OUT Command

Command "C54" [CR]
Detail Set Input 1 to Monitor OUT.
Acceptable
Response
Unacceptable
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
Soft Engineer Division
Page 18 / 24