Image (Toggle) Command; Direct On Setting Command; Direct On Cancel Command; Power Management Ready Command - Canon LV-8320 Specifications

6.34. IMAGE (Toggle) Command

Command "C27"[CR]
Switch Image Setting status.
Detail
This command works the same way as "IMAGE" button of the remote control.
Acceptable
Response
Unacceptable

6.35. Direct on Setting Command

Command "C28" [CR]
Enable Direct power on function.
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable
Response
Unacceptable

6.36. Direct on Cancel Command

Command "C29" [CR]
Cancel Direct power on function.
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable
Response
Unacceptable

6.37. Power Management Ready Command

Command "C2A" [CR]
Set Power management mode to Standby mode.
Detail
This status is stored in EEPROM and retained regardless of Power ON/OFF.
Acceptable
Response
Unacceptable

6.38. Power Management OFF Command

Command "C2B" [CR]
Set Power management mode to OFF mode.
Detail
This status is stored in EEPROM and retained regardless of Power ON/OFF.
Acceptable
Response
Unacceptable

6.39. Power Management Shut down Command

Command "C2E" [CR]
Set Power management mode to Exit mode.
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable
Response
Unacceptable
LV-8320 Basic Serial Command Specifications
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
[ACK] [CR]
" "[CR]
-14-