On Start Cancellation Command; Power Management Ready Command; Power Management Off Command; Power Management Shut Down Command - Canon LV-S4 Specification

SERIAL FUNCTIONAL SPECIFICATION
7.30. ON Start Disable Command
Command
Detail
Response

7.31. Power Management Ready Command

Command
Detail
Response

7.32. Power Management OFF Command

Command
Detail
Response

7.33. Power Management Shut Down Command

Command
Detail
Response

7.34. D.Zoom + Command

Command
Detail
Response
7.35. D.Zoom - Command
Command
Detail
Response
"C29" [CR]
Clear to Power ON Start
This status is stored in EEPROM, so even if turning off and on.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C2A" [CR]
Set Power Management to Ready
This status is stored in EEPROM, so even if turning off and on.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C2B" [CR]
Set Power Management to OFF mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C2E" [CR]
Set Power Management to Shut down mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C30" [CR]
Moving on to Digital Zoom mode and make the screen image bigger.
This command works the same as the Remote control's "D.ZOOM UP" button.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
"C31" [CR]
Moving on to Digital Zoom mode and make the screen image smaller.
This command works the same as the Remote control's "ZOOM DOWN"
button.
Acceptable [ACK] [CR]
Unacceptable "?" [CR]
Page 11 of 18