Image Command; On Start Setting Command; On Start Concelation Command; Power Management Setting Command - Canon LV-7555 Specifications

MR3P Series Basic Serial Command Function Specification
‚ S .28

IMAGE Command

Command "C27" [CR]
Change IMAGE setting status.
Detail
Works same as the remote control's "image button".
Acceptable
Response
Unacceptable
‚ S .29

ON START SETTING Command

Command "C28" [CR]
Set to Power ON Start setting status
Detail
This setting status is stored in EEPROM, even if the power is ON/OFF.
Acceptable
Response
Unacceptable
‚ S .30 ON START CANCELATION Command
Command "C29" [CR]
Cancel Power ON Start
Detail
This status is stored in EEPROM even when power is ON or OFF.
Acceptable
Response
Unacceptable
‚ S .31

POWER MANAGEMENT SETTING Command

Command "C2A" [CR]
Set Power Management.
Detail
This status is stored in EEPROM even when power is ON or OFF.
Acceptable
Response
Unacceptable
‚ S .32

POWER MANAGEMENT CANCELATION Command

Command "C2B" [CR]
Cancel Power Management Setting.
Detail
This status is stored in EEPROM even when power is ON or OFF.
Acceptable
Response
Unacceptable
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
[ACK] [CR]
"• H " [CR]
Soft Engineer Division
Page 14 / 24