Computer 2 Scart Command; Image (Toggle) Command; On Start Setting Command; On Start Cancellation Command - Canon LV-5220 - Multimedia Projector SVGA Functional Specification

Basic Serial Command Functional Specification

6.31. Computer 2 SCART Command

Command "C26" [CR]
Select SCART RGB input for Computer 2.
Detail However, when Computer 2 terminal is set to Monitor Out, acceptable command is
returned, but does not execute command.
Acceptable
Response
Unacceptable

6.32. Image (Toggle) Command

Command "C27" [CR]
Switch Image setting status.
Detail
This command works the same as the Remote control's "IMAGE" button.
Acceptable
Response
Unacceptable

6.33. On Start Setting Command

Command "C28" [CR]
Set Power On Start status
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable

6.34. On Start Cancellation Command

Command "C29" [CR]
Cancel Power On Start status.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable

6.35. Power Management Ready Command

Command "C2A" [CR]
Set Power Management to Ready mode.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable

6.36. Power Management Off Command

Command "C2B" [CR]
Set Power Management to Off mode.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable

6.37. Power Management Shut Down Command

Command "C2E" [CR]
Set Power Management to Shut Down mode.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page 11 of 19