Canon LV-7555 Specifications page 24

MR3P Series Basic Serial Command Function Specification
‚ T .11 Setting Read Command
Command "CR4" [CR]
Detail Get setting status for screen such as Ceiling/Rear.
Acceptable
Response
Unacceptable
‚ T .12 Temp Read Command
Command "CR6" [CR]
Get the temperature inside a projector.
Detail When some temperature sensors are installed in the projector, it is possible to
Acceptable
Response
Unacceptable
"%1" [CR]
"11" [CR] = Normal Screen Setting
"10" [CR] = Rotation around the horizontal setting (Rear• •
Ceiling ON)
%1
"01" [CR] = Rotation around the horizontal setting Rear ON• j
"00" [CR] = Vertical and right-and left (four directions)
reversal setting (status: Ceiling ON
"• H " [CR]
know the temperature all at once.
"%1_%2_%3" [CR]
%1• • T emperature, sensor 1
%2• • T emperature, sensor 2
%3• • T emperature, sensor 3
Temperature data form shows as 00.0.
When the temperature sinks to -, the first character is "-" like
%1
"-05.5" [CR].
%2
When cannot return the temperature data due to hardware
%3
problems, the first character is "E" like"E00.0" [CR].
When some temperature sensors are installed, the projector
sends command continuously.
"_31.5__35.2__33.4" [CR]
There is the first sensor's information, and after one space,
there is the second sensor's information.
"• H " [CR]
Soft Engineer Division
• j
Page 24 / 24