Assigning A Static Ip Address; Changing Wireless Settings After Installation - Dell V515W User Manual

From the wireless networks list that appears, select your network, and then click Continue.
If your wireless network does not appear in the list:
a
Connect to another wireless network.
For Windows users
Click Unlisted Network.
For Macintosh users
Select Other Wireless Network from the list, and then click Continue.
b
Enter the details about your wireless network.
Note: Your WEP, WPA, or WPA2 key may be obtained from the bottom of the box, the documentation that
came with the box, or from the box Web page. If you have already changed the key for your wireless network,
then use the key you created.
4
Follow the instructions on the computer screen.

Assigning a static IP address

The printer will be assigned an IP address automatically through DHCP on most wireless networks.
1
Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network.
2
Print a network setup page to see the IP address currently assigned to the printer.
3
Open a Web browser and then type the printer IP address in the address field. Press Enter.
Note: If you are using a proxy server, then temporarily disable it to load the printer Web page correctly.
4
Click Configuration > TCP/IP > Set static IP address.
5
In the Address field, type the IP address you want to assign to the printer, and then click Submit.
To verify, type the static IP address in the Web browser address field, and then press Enter.
For more information, contact your system support person.

Changing wireless settings after installation

To change wireless settings on the printer, such as the configured network and the security key, do the following:
For Windows users
1
Click or Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Navigate to:
Printer Home > select your printer > Settings tab > Wireless setup utility
4
Follow the instructions on the computer screen.
Networking
94