Control Conditions - Konica Minolta magicolor 1600W Service Manual

Theory of Operation Ver. 1.0 Nov. 2008
19.2.2

Control conditions

Motor name
DC power supply
fan motor (FM1)
Ozone ventilation
fan motor (FM2)
Condition Control conditions
• For a predetermined period of time after the power is
turned ON
• For a predetermined period of time after the end of the
ON
(high Energy save mode
speed)
• At the start of a print cycle (full-speed rotation after a
predetermined period of time of half-speed rotation)
• At the start of pre-drive
• During standby
ON (low
• At the end of a print cycle (half-speed rotation after a
speed)
predetermined period of time of full-speed rotation)
• During the Energy save mode
• When a malfunction occurs
OFF
• During firmware upgrading
• During transport motor drive
ON
• Other than above
OFF
19. Fan control
71