Eclipse AVN726E Owner's Manual page 114

Optional Features
Rear View Camera Operations
ATTENTION
● The image range displayed on the screen
may vary depending on vehicle or road
surface conditions.
● The image range displayed on the screen is
limited; therefore,
something that is located near both ends of
the bumper or under the bumper.
● Colors shown in the rearward image may be
different from the actual colors of the
objects.
● You can adjust the brightness and contrast
of the screen. When you wish make
adjustments, hold
more and the Image quality adjusting screen
will appear. See
Setting" on page 33
● In the following cases, it may be difficult to
watch the screen, but it is not an error.
• In dark places ( at night, etc.)
• The temperature near the lens is high or
low.
• When there are water drops on the
camera, or when humidity is high (during
rain showers, etc.)
• When foreign substances (mud, etc.)
have become attached to locations near
the camera.
• The camera lens has been exposed
directly to sunlight or the rays of
headlights.
• If a high-intensity point (sunlight reflected
on the vehicle body, etc.) is reflected on
the camera, it may result in a smearing
phenomenon
cameras.
<Screen Appearance>
* Smearing phenomenon: Refers to an
image lag that is caused in the vertical
direction of a high-intensity point (sunlight
reflected on the vehicle body, etc.) on the
camera.
112
112
you cannot display
for a second or
"Screen Adjustment and
*
particular to
Point of high-
intensity brightness
CCD