Setting Display Of Multi-Angle Mark - Eclipse AVN726E Owner's Manual

■ Setting display of multi-angle
mark
You can configure to display or hide the multi-
angle mark during the playback.
Touch
1
Angle Indicator
setting screen.
● On each touch, On and Off switches.
2
Touch .
Done
ATTENTION
When the display setting of the multi-angle
mark is set to [Display], a multiple angle mark
is displayed at the top of the screen whenever
selection of multiple angle becomes available
in the disc.
■ Specifying
Screening Level
You can restrict viewing of scenes that are
inappropriate for children, for example, adult-
themed or violent scenes. The parental
screening levels can be specified in stages
depending on levels.
CHECK
This function is not available for discs that do
not support the parental screening level
function.
Touch
1
Parental Setting
setting screen.
189
on the initial
the Parental
on the initial
Touch the number digit by digit to
2
enter the code number.
● If the code number is omitted, "----" is
displayed in the upper field.
3
Touch .
Done
● Touch
to return to the previous page.
Touch the desired parental screening
4
level.
● If you have entered an incorrect code
number, eject the disc once, and specify
the parental screening level again.
5
Touch .
Done
189