Sub-Woofer Settings; Setting Sub-Woofer Level; Switching The Phase - Eclipse AVN726E Owner's Manual

Sub-Woofer Settings

You can adjust the audio output when a sub-
woofer is connected.

■ Setting sub-woofer level

You can adjust the sub-woofer output level.
1
Touch
Woofer Setting
Touch or
2
level.
● You can set the output at any of 13 output
levels (+6 to -6).
● After completing the setting, touch
to store the setting and return to the
immediately preceding screen.
129
.
of the woofer
Done

■ Switching the phase

The sound outputted from the sub-woofer
includes the same frequency bands as the
sound from the front/rear speakers, and
cancellation can occur under some in-vehicle
conditions. Switch the phase of the sub-
woofer to prevent this phenomenon. You can
set the phase in according to the in-vehicle
conditions.
1
Touch
Normal
●
: Sets the output timing of the
Normal
speakers and sub-woofer to be the same.
●
: Staggers the output timing of
Reverse
the speakers and sub-woofer.
● After completing the setting, touch
to store the setting and return to the
immediately preceding screen.
or .
Reverse
Done
129