Setting From History; Setting From Coordinates - Eclipse AVN726E Owner's Manual

Navigation Guidance
Navigation Guidance
■ Select
from
information search criteria
Your can save POI search criteria in the POI
section of the Manage menu. However,
Navigation also comes with a number or pre-
saved criteria which can be used immediately
to search for POIs.
Touch the following switches: [Find],
1
[Find POI] (Advanced mode).
2
Touch [Saved Search Criteria].
Select one of the saved criteria, and a
3
list of matching POIs appears.
4
Touch the desired POI in the list.
The map appears with the selected
5
point in the middle. From the Cursor
menu, touch [Set as Destination]
(Advanced mode). The route is then
automatically calculated, and you can
start navigating.

Setting from History

Past destinations are appear in the History.
Touch the following switches: [Find],
1
[History] (Advanced mode).
If necessary, move between pages
2
with to see past destinations.
3
Touch the desired item.
98
98
saved facility
The map appears with the selected
4
point in the middle. From the Cursor
menu, touch [Set as Destination]
(Advanced mode). The route is then
automatically calculated, and you can
start navigating.

Setting from Coordinates

This feature is available in Advanced mode
only.
Touch the following switches: [Find],
1
[Find Coordinate]
● Touch [Coordinate Display Format] to
change the format of the displayed
coordinates.
Touch longitude or latitude values to
2
change the coordinates.
Enter the coordinate values in the
3
WGS84 format: The latitude (N or S)
and the longitude (E or W).
4
Touch [Done].
5
Touch [OK].
The map appears with the selected
6
point in the middle. From the Cursor
menu, touch [Set as Destination]
(Advanced mode). The route is then
automatically calculated, and you can
start navigating.