Lexmark CX410 User Manual page 167

Understanding printer menus
Speaker Settings
Use
Speaker Mode
Always Off
On until Connected
Always On
Speaker Volume
High
Low
Ringer Volume
Off
On
Answer On
Use
All Rings
Single Ring Only
Double Ring Only
Triple Ring Only
Single or Double Rings Only
Single or Triple Rings Only
Double or Triple Rings Only
Fax Mode (Fax Server Setup) menu
Fax Mode sends the fax job to a fax server for transmission.
Use
To Format
Reply Address
Subject
Message
SMTP Setup
Primary SMTP Gateway
Secondary SMTP Gateway
Image Format
PDF (.pdf)
XPS (.xps)
TIFF (.tif)
To
Specify the mode of the speaker.
Notes:
•
"On until Connected" is the factory default setting. A sound is issued until the
fax connection is made.
•
Always On turns the speaker on.
•
Always Off turns the speaker off.
Control the volume setting.
Note: High is the factory default setting.
Control the fax speaker ringer volume.
Note: On is the factory default setting.
To
Specify ring patterns when the printer is answering calls.
Note: All Rings is the factory default setting.
To
Enter specific fax information using the virtual keyboard on the printer control panel.
Specify SMTP setup information.
Specify SMTP server port information.
Specify the image type for scanning to fax.
Note: "PDF (.pdf)" is the factory default setting.
167