Transmitting data
4.7.7
Fax Header Settings (G3/IP/I-FAX)
Select the sender information that is attached when sending a message. Select one from the list of sender
names.
In the initial state, the sender name set as default setting is added.
!
Detail
Use "TTI Setting" in "Administrator Settings"to register the detail added to the original as sender
information. For details, refer to
Use "TTI/RTI" in "Administrator Settings" to register how to add sender information. For details, refer
to
"Fax Settings - Header/Footer Position" on page
501/421/361
"Fax Settings - Header Information" on page
9-18.
4
9-16.
4-69