Turning The Power On And Off - Eclipse CD5425E Owner's Manual

Turning the power on and off

When the power is turned on, the state used
when the power was turned off such as CD and
tuner playback is restored.
When the vehicle has no ACC position on the
ignition switch, care is needed when turning off
the deck. Follow Step 2 or Step 3 when turning
off the power.
When power is OFF, press the
1
[PWR] button.
The power will come ON.
ATTENTION
When the deck's power is turned on for
the first time or if the battery terminals
have been disconnected because of a
reason such as vehicle maintenance
and the power is then turned back on,
the deck will start up in FM1 mode.
After this, the broadcast stations will be
searched for automatically and stored
in buttons [1] to [6].
When power is ON, press the
2
[PWR] button for less than two
seconds.
The power will go OFF and the deck
will be in Standby.
If you press the [PWR] button again
for more than one second, the power
will go completely off.
When power is ON, press the
3
[PWR] button for more than two
seconds.
The power will go completely OFF.
Names of controls and parts
ATTENTION
If a car is not equipped with an ACC
position, press the [PWR] button for more
than two seconds.
77
III