How To Cancel The Key Cd; How To Change The Key Cd; How To Resume Normal Operation (Esn Security Lock Out) - Eclipse CD5425E Owner's Manual

How to cancel the Key CD

1
Check that the unit is in standby.
Press and
2
button, then button [6], and hold
both for more than one second.
A [SEC] message appears, then in
two seconds it will change to [DISC].
3
Press the [CD
The front panel
CD5425E is now ready for your Key
CD in the CD slot.
ATTENTION
If a CD has already been inserted, a
[SEC] message appears, and then the
front panel opens and the CD is
ejected.
4
Insert your Key CD into the slot.
A [CANCEL] message appears, then
the Key CD is ejected.
The Key CD is cancelled.
ATTENTION
• This process
protection for ESN deck.
• If power to the ESN deck is
disconnected, then reconnected, a
Key CD will not need to be
inserted in order to return the unit
to normal operation.
• Inserting a CD other than the Key
CD will not cancel the protection.
Instead, the display [ERR] for two
seconds, then the normal CD
playback mode will activate.
hold the [FUNC]
] button.
opens; The
cancels the
ESN security operating procedure
5
Press the [CD
The front panel closes.

How to change the Key CD

1
First, cancel the existing Key CD.
Refer to "How to cancel the Key CD".
2
Next, program a new Key CD.
Refer to "How to program the Key
CD".
How to resume normal operation
(ESN security lock out)
If power is disconnected while ESN security
is active (a Key CD was programmed),
operation is disabled until power is restored
and the unit unlocked. Follow this procedure
to resume normal operation.
When the power is turned on after
1
disconnecting the battery power,
a [SEC] message will appear for
two seconds.
message changes to [DISC] and
the press the [CD
the CD5425E is ready to accept
your Key CD into the slot.
2
Insert your Key CD.
If the correct CD is inserted, an [OK]
message will appear for two seconds
and the CD will begin playing.
103
] button.
Thereafter,
] button, then
VIII