Table of Contents
Advertisement
3
Use the pull-down menus to configure as follows:
Connected to: Printer-Modem Port
Port Speed: 19200 bps
Flow Control: CTS & RTS (DTR)
Dial type: Tone
4
In the Modem init string settings section, click the Use: option and enter the following init string: AT&F
5
Click OK, then click the Accounts tab.
6
Click New.
7
Enter a name to identify the new account.
8
Enter your username and password, then click the Dialup tab.
9
Enter the phone number (and area code, if necessary) in the Main Number section (and click the Dial area code option if
needed).
10
If there is an alternate dial-up number, enter the information in the Alternate Number 1 section, then click OK to complete
this screen.
11
Click the Options tab, and enter the necessary configuration information (see your internet service provider's setup and
configuration information, or consult your company's Helpdesk for the setup information).
12
Click OK to complete this section.
13
Use the pull-down menu to select your Nokia modem and dial-up account, then click the Connect button to dial the phone.
[ 43 ]
Connecting to the Macintosh
13
Advertisement
Table of Contents
