Table of Contents
Advertisement
Copy information from the source phone
When you select Copy data from a phone to a PC, Content Copier
transfers all compatible data types (phone book, calendar, to-do, caller
groups, etc.) from the phone containing the data you want to back up or
transfer. This phone is called the "source phone" and can be one of the
phones listed on the previous page, or another Nokia 6340/6340i phone.
•
If you are backing up phone data to your PC, Nokia Content Copier
guides you through the process of saving the information to your PC
hard drive.
•
If you are copying data from a different source to your Nokia 6340 or
6340i phone, the data must first be saved to your PC. Once you
connect your Nokia 6340/6340i phone ("target" phone), follow the
instructions, "Copy information to the target phone" below.
Save the source phone data
Once the source phone data has been read, save the information to your PC's hard drive.
1
Click the Save Data button.
2
Navigate to the location on your hard drive where you want the
information stored.
Nokia Content Copier automatically names the files for you, based on
the type of data that is read from the source phone.
3
Click Next to complete this process.
4
Click New Action to return to the beginning of the Content Copier
wizard and perform a different task, or click Finish to close Content Copier.
Copy information to the target phone
Before you can copy information to the target phone, you need to load
the information into the memory of your PC. You should have already
saved the source phone data to your PC using the Copy data from a
phone to a PC option.
1
Launch Nokia Content Copier, then click Next.
2
Click Copy data from a PC to a phone, then click Next.
3
Click the Select Source Folder button. Locate the directory
containing the information you want to use.
4
Click Next to begin copying data from your PC to your phone.
Once the source phone information has been loaded from your PC hard drive, you are asked to determine the types of information
you want copied into your phone. The compatible data types are displayed along with the ability to select the types of data you
wish to transfer.
Use the check boxes next to the data types to select or deselect the information you want to copy to your phone. Click Next to
begin copying the data to your phone.
IR connection time-out
If you are copying data from one phone to another and you are using IR for both the source and destination phones, stop the IR
connection between source phone and PC. Allow the Windows warning message regarding interrupted IR communications to time-
out completely before aligning the target phone with the PC IR port. By doing so, you allow Connection Manager to detect your
phone quicker.
View Content Copier log
When you have successfully completed one of the Nokia Content Copier tasks, the Finish screen is displayed along with a log of
the tasks that were just performed. At the Finish screen, you have the following options:
•
Click Save to save the log (.LOG) file to your PC hard drive.
•
Click New Action to return to the beginning of the Nokia Content Copier wizard.
•
Click Finish to exit Nokia Content Copier.
[ 7 ]
Nokia Content Copier
4
Advertisement
Table of Contents
