Trouble Shooting - Haier HMS6-1 Operation Manual

Trouble shooting

The following must be confirmed before calling for service:
P r oblem
I s the power supply plugged in and switched on.
P l ug another appliance into the wall socket to
test if there is power.
The dryer does not start
Start the dryer,but it does
The loaded laundry has reached the req u irmrnts
not start and the screen
for the drying setting.
displayed " E nd" .
The drying result is not
good and the drying time
is too long.
I s
got a deposit layer forming, if so clean the
The remaining time will be adj u sted and corrected
continuously and automatically based on the
The remaining time display
following factors:
is halted, or the remaining
time displayed is skipping
The automatic adj u stment is a normal operation.
P o ssible C a use
Trouble shooting
I n case of an improper operation or trouble with the machine when it operates, the
code corresponding to the trouble will be displayed on the screen:
C a use
C o de C a tegory
There is no change in
Trouble code
E2
the temperatures of
the laundry in the tub
The thermal sensor
E5
Trouble code
open-circuited or short
circuited
Trouble code
E6
Solutions
C o ntact a professional
serviceman
C o ntact a professional
serviceman
C o ntact a professional
serviceman