Important Safeguards To reduce the risk of fire, electric shock or injury when using electrical appliances, please follow these basic safety precautions: FOR YOUR SAFETY Read all instructions carefully, even if you are familiar with the appliance. • This appliance is not intended for use by children or infirm persons without supervision.
Operating your Dryer Electrical Requirements Connect the unit to a standard earthed three pin outlet. The power supply must be 220-240V. Loading the Dryer • Ensure that items do not contain combustible materials or foreign objects (pins, coins etc.) • Turn items with zippers inside out and fasten buckles.
Control Panel Functions Temperature Selector Button Select ‘Strong’ for items that are particularly bulky or large quantities. Select ‘Soft’ for materials like Silk, Nylon, Linen etc. Drying Timer Dial There are five drying combinations available: Cool, Anti-wrinkle, Warm, Hot and Air Dry. Air Dry:This function runs with cool air,primarily to air and freshen clothes...
Installation Instructions Where to place your dryer Place the dryer in a dry, well ventilated area, away from heat and direct sunlight. If the dryer is not wall mounted, it must be placed on a firm level surface. Do not place the dryer on carpet as this will block the intake.
Page 7
Wall Mounting Instructions 3. To install the hook to the dryer, remove screws 1, 2, 3 & 4 as indicated in Fig. 2. 4. Align bracket as shown in Fig. 3 and refit screws tightly. 5. Remove lower side screws and install the spacers provided as per Fig.
Maintenance Cleaning the Lint Filter Unplug the power cord prior to any cleaning. The lint filter must be cleaned before and after each use. Never use the dryer without the filter in place. 1. Removing the Filters Insert fingers into the four holes around the exhaust vent shroud and pull out to remove.
Troubleshooting Review the following pages before calling for service. Problem Timer knob does not • Is the power on? turn. Drum does not turn. • Is the door closed? • Is the power on? • Is there power to the wall socket? Exhaust air is not hot.
Need help?
Do you have a question about the HDM3.5-1 and is the answer not in the manual?
Questions and answers