Removing The Thermal Cutout - Kyocera FS-1050 - B/W Laser Printer Service Manual

(5) Removing the thermal cutout

CAUTION
Do not bend the terminals of the thermal cutout.
1. Remove and split the fuser unit (See page 5-20).
2. Remove the heater lamp (See page 5-23).
3. Remove the heat roller (See page 5-24).
4. Remove the two screws 1.
5. Remove the thermal cutout 2.
1
Figure 5-2-26 Removing the thermal cutout
2
5-27
FS-1050